Description

Chuck your outdated, discolored camper oven vent flapper and change it with the Dumble RV Provides Camper Hood Vent Cowl in White. It requires an approximate 10.3-inch x 3.5-inch opening and 1.7-inch inlet flange collar size (depth that goes via wall). If screw gap positions don’t align along with your outdated vent, merely drill holes within the required places. This trailer vary hood vent suits so long as the general measurement of the vent and its flanges are appropriate. The exterior flap door opens when the exhaust fan is turned on, and the swivel friction locks latch the flap within the closed place when touring down the highway. Bundle consists of (1) white RV oven vent cowl and (10) screws. Use with compelled air flow solely. We advocate including caulk or putty tape (not included) for a decent seal. Warning: This product can expose you to chemical compounds which is [are] recognized to the State of California to trigger most cancers and start defects or different reproductive hurt.

Make sure that this fitsby coming into your mannequin quantity.
REPLACE YOUR OLD RV STOVE VENT FLAP: The Dumble RV Provides Camper Vary Hood Vent Cowl in White is an injection-molded styrene plastic RV vent vary horizontal exterior wall vent that can be utilized with compelled air flow on giant outlet static exhaust vary hoods in your RV, camper, journey trailer, or cell house kitchen
PERFECT SIZE: Requires 10.3-inch x 3.5-inch (26.2×8.9 cm) opening and 1.7-inch (4.3 cm) inlet flange collar size (depth that goes via wall); 11.6-inch x 5.3-inch x 2.1-inch (29.5×13.5×5.3 cm) total exterior dimensions; 10 complete screw holes – high and backside holes 3.75 inches (9.5 cm) aside (measurement heart to heart); aspect holes 2.4 inches (6.1 cm) aside; Make sure that the general measurement of the vent and its flanges are appropriate
INSTALL IN MINUTES: Take away your hood (4 screws that go up via hood into cupboard underside), draw define of this RV vary hood exhaust vent insert on inside wall the place hood meets wall, drill holes via wall on the corners of the define, noticed define from inside, tuck set up into wall, noticed define from exterior, caulk/tape (not included) vent body, press vent into opening, safe vent with the included screws, reinstall hood
KEEP OUT THE BUGS & ELEMENTS: Options an RV hood damper that enables the exterior flap door to open when the exhaust fan is turned on whereas the two swivel friction locks latch the only flap (runs the size of the vent) within the closed place when touring down the highway; Flapper stays within the closed place and solely opens when engaged by turning on exhaust fan which them pushes the flapper open from the airflow; Display elective, not included
PACKAGE CONTENTS: RV range vent cowl substitute package deal consists of (1) polar white vary vent for RV with (10) set up screws to your comfort